Home
|
Products
|
Videos
|
Prices
|
Demonstrations
|
Contact
|
The Lonestar LS300T
Built to exacting US standards and CE compliant, this exceptionally robust piece of drilling machinery has been well received by the Drilling Industry. This trailer mounted rig offers the best performance of the Lonestar Line with the capability to bore a 6” (15.24cm) bore hole to a depth of 300ft (91.44m) many times faster when compared to conventional cable percussion rigs widely used in the UK. The rotary action of the LS300 range enables the user to bore at a far greater speed; resulting in dramatic time and cost savings. It delivers improved performance with ease of operation and direction of both rotary and draw works.
The LS300 range is powered by a 20HP petrol (19HP diesel) engine. The trailer mounted version, (LS300T - shown below), is extremely robust and can be pulled behind an average 4X4 or light commercial vehicle.
 |
Specifications - LS300T
MAST
78” (198.1cm) travel
5,000 lbs Pullback (@ 2,500 PSI) (170 BAR)
5,000 lbs Pushdown (@ 2,500 PSI) (170 BAR)
ROTARY
665 lbs/ft Max Torque (@ 2,500 PSI) (170 BAR)
95 RPM @ 10 gpm
Load Bearing side inlet swivel with manual J-latch breakout tool
MUD PUMP
190 ft Max Head
200 GPM Max Flow
2” Discharge
2” Suction
13 HP Gas or 10 HP Diesel
TRAILER
7,000 lb Rated Tandem Axle, 5 X 10 Ft Open
Grating Bed, Surge Brakes, Leveling Jacks (3),
Pipe Racks (2), 2” Ball Coupler, Spare Tyre
Dimensions:
Overall Length: 190” (4.8m),
Width: 82” (2.08m) or 72” (1.83m)
Height: Transport 70” (1.77m)
Height: Operating 130” (3.3m)
Operating Weight: 4,750 lbs (2154.6kg) (average)
HYDRAULIC SYSTEM
3000 PSI (205 BAR) Max Pressure
Built-in Heat Exchanger and Cooling Fan
3 Gal. Hydraulic Reservoir
4 Gal. (15.14l) Fuel Tank
Gas: 20 HP Honda, Electric Start, 10 GPM Flow
Diesel: 19 HP Lombardini, Elec. Start, 8 GPM Flow
CONTROLS
Rotary - 4 Way Detented Valve
Draw-works - 4 Way Spring Centered Valve
Bypass Flow Control on Draw-works Pushdown
Circuit Provides Adjustable Weight on Bit
Pressure Gauge 0-3,000 PSI (205 BAR)
DRIL STEM
2” ID X 5 FT Lg, M250 Straight Thread Tool Joints
OPTIONS
Drill Collars
Roller Cone Bits
Anchor Kit